How to Make Wooden Freshwater Fishing Lures - Simple Practical Tips

One of the best ways of catching a fish is by usingfish such as a minnow.
an artificial lure. Some lures on the market today3. Next, cut slits in the head of a pinhead clothes pin.
claim to be so good at catching the big one, it is illegalIt should be around a half of an inch thick. After
to use in some fishing tournaments. The type of lureputting some adhesive in the cuts, put the metal
that is growing in popularity is the woodenpieces down in the slits.
freshwater fishing lure.4. A hole should be drilled for the gluing of the hook.
These fishing lures can be found in just about anyThe hook should be secured by an adhesive such as
department store and can be found on web sitesSuper glue.
dedicated to fishing and sporting equipment. The5. The legs of the clothespin should be cut off flush
prices vary, depending on the brand and size of thewith the head of the pin. When that is accomplished,
lure. There is a less expensive alternative toa hole can be drilled in the front of the head so that
purchasing a store bought lure. With just a fewstraight pins with beads can be added for the look of
supplies, a wooden fishing lure can be made in aeyes.
matter of minutes. The following is one of the6. The final step is to paint the lure. Most fish tend to
easiest ways to create a wooden lure.be attracted to bright colors such as red, orange and
1. Cut an aluminum can and flatten it into a thin sheetyellow.
of material. Be careful when cutting and shapingThe freedom of experimentation is just one of the
sheet metal, it can quickly turn into bodily injury.advantages to creating unique wooden freshwater
2. With shears sharp enough for sheet metal, cutfishing lures that can be used for years to come. Be
spoon shaped pieces from the sheet of aluminum.careful when making this type of lure. Use thick
They should taper on the end and a variety of sizesgloves when handling and forming sheet metal.
is suggested. These pieces should resemble a small